WiMo SHF 1367 13cm 67el. Yagi
67 el.YAGI pro pásmo 13cm, zisk 20dBd
-----
This is the super yagi for the 13cm-band. At such high frequencies the antenna design turns out to be quite complicated. All tolerances must be observed
down to the minimum. The length of the elements changes in just some 1/10th mm steps. It takes many calculations and approximations to optimize the d
esign of the boom and the elements which are thick compared to the wave length; many corrections must be tested and implemented until the optimal mechanical dimensions are found.
As described before all yagis of SHF-Design are manufactured and assembled automatically; the boom will be supplied with all elements assembled.
Consequently, the tolerances coming to play are kept down to the absolute minimum compared to the good old 'manual assembly' done by the user.
The 13cm yagis all have 6 reflectors and show a performance of 25 dB f/b ratio.
We offer a replacement dipole in case this would ever become necessary (Part No. 18410.01), and also a special dipole which is mounted upside down to
facilitate 2x2 H setups and has a 180° phase difference to the normal dipol (Part No. 18410.02).
-----
This is the super yagi for the 13cm-band. At such high frequencies the antenna design turns out to be quite complicated. All tolerances must be observed
down to the minimum. The length of the elements changes in just some 1/10th mm steps. It takes many calculations and approximations to optimize the d
esign of the boom and the elements which are thick compared to the wave length; many corrections must be tested and implemented until the optimal mechanical dimensions are found.
As described before all yagis of SHF-Design are manufactured and assembled automatically; the boom will be supplied with all elements assembled.
Consequently, the tolerances coming to play are kept down to the absolute minimum compared to the good old 'manual assembly' done by the user.
The 13cm yagis all have 6 reflectors and show a performance of 25 dB f/b ratio.
We offer a replacement dipole in case this would ever become necessary (Part No. 18410.01), and also a special dipole which is mounted upside down to
facilitate 2x2 H setups and has a 180° phase difference to the normal dipol (Part No. 18410.02).