Expert Electronics Colibri DDC SDR
Colibri DDC SDR with Ethernet interface
Colibri SDR je softwarově definovaný přijímač s rozsahem 9 kHz - 55 MHz.
Na rozdíl od jiných SDR, které se standardně připojují k PC pomocí USB kabelu, zde komunikaci zajišťuje síťový ethernet kabel.
To má výhodu v mnohem větší rychlosti přenosu mezi přijímačem a PC, umožňuje použití delších kabelů a integraci SDR do místní sítě a remote provoz.
SDR se dodávaným kabelem připojí buď přímo k PC nebo do routeru.
Integrace do místní sítě je bezproblémová díky tomu, že Colibri SDR nabízí automatické IP adresovaní a v případě potřeby poskytuje DHCP server.
Díky této funkci lze připojit SDR přímo k jednomu PC bez síťového switche. Toto je výhodné např. pro přechodné portable použití na cestách apod.
Colibri SDR samozřejmě umožňuje použití statické IP adresy pro fixní instalace.
Specifikace:
Frekvenční rozsah 9 kHz – 55MHz
Bandscope (Panorama) 62.5MHz
Počet nezávslých přijímačů 2
Šířka spektra pro každý přijímač 39, 78, 156 nebo 312 kHz
ADC width, Sample rate 14 Bit, 125 MS/s
Blocking Dynamic Range 110 dB
IMD3 Dynamic Range 90 dB
I/Q Image Rejection > 110 dB
Internal TXCO 20MHz, ±0.5ppm
External 10MHz Clock source
Audio output (headphones)
Attenuator 0 dB, 20 dB
Input Filter Low Pass 55MHz
Additional audio output (headphones) 32 ohm, 30mW
Napájecí napětí 5V ± 10%
Proudový odběr cca. 700mA
LAN Interface RJ-45, 10/100/1000MBits/s [1], MDI/MDI-X supported
IP V4 DHCP-Server, Client, static IP address
rozměry 64 x 24 x 112 mm
hmotnost 300 g
-----
A compact ColibriDDC receiver was designed to work on HF band 0.09 to 55 MHz, for better performance you can add the internal BPF-module
(160-10M bands). With the help of external filters, ColibriDDC can effectively operate on frequencies up to 800 MHz.
LAN interface allows you to use the receiver remotely via LAN cable and to connect several receivers to one PC at the same time, for various projects.
Also, you can hook up the receiver with the RaspberryPi3 (with installed ExpertRS software) and use it from any place on the Planet, you just have to
have a reliable internet connection.
Note! The basic version of the receiver doesn't include the BPF-module.
Main features and capabilities of the receiver
RX path based on DDC (Direct Down-Conversion) architecture
ExpertRemote system provides full remote control of the receiver
2 software receivers (each up to 312 kHz) + SubRX for each of them (4 slices total) + independent wideband Bandscope up to 62.5 MHz
ExtCTRL connector to control external devices with 7 powerful keys with open collector
100 Mbps Ethernet LAN interface provides fast and reliable connection to PC
TCI interface for seamless connection with third-party software like SDC (with its own Skimmer), LogHX, SWISSLOG and RUMlog, more are coming
Record IQ channel with the bandwidth up to 312 kHz
Receiving in undersampling mode up to 800 MHz (requires external BPF)
High-quality 24-bit audio–DAC installed for the smallest signal delays
Low power consumption, 5V 0.64A
External reference generator input 10 MHz
Small size W 65 x H 26 x L 125 mm
PC requirements
CPU Intel Core i3 1.6 GHz and higher
8GB RAM
Video card, minimum resolution 1024x600, 128 MB, OpenGL 1.5 support and higher
Local network connector 100 Mbps or 1 Gbps
The ExpertSDR2 works with Windows 7-10, OS Linux Ubuntu x64 and macOS 10.12 and newer
Modes* LSB/USB/DSB/CW/AM/SAM/NFM/WFM
Receiving bandwidth, MHz 0.01 - 55 (0.01-62.5)
Receiving bandwidth in all Nyquist zones, MHz 0.01– 800
Spectrum scope bandwidth (up to), MHz 62.5
Amount of independent receiving channels 2
Sensitivity, uV 0.3
Blocking Dynamic Range (BDR), dB 110
IMD3 Dynamic Range, dB 90
Image channel suppression, dB >110
Supply voltage range, V 4.5...5.5
Maximum consumption current, A 0.64
RF ADC clock frequency, MHz 125
RF ADC resolution, bit 14
Local oscillator stability, ppm +/- 0.5
Built-in attenuator, dB 0, -20
Built-in audio DAC resolution, bit 24
Dimensions W x H x L, mm 64x24x112
Weight, kg 0.3
* More modes can be supported via external software
Specifications are subject to change without notice or obligation and specifications are only guaranteed within the amateur radio bands.
Colibri SDR je softwarově definovaný přijímač s rozsahem 9 kHz - 55 MHz.
Na rozdíl od jiných SDR, které se standardně připojují k PC pomocí USB kabelu, zde komunikaci zajišťuje síťový ethernet kabel.
To má výhodu v mnohem větší rychlosti přenosu mezi přijímačem a PC, umožňuje použití delších kabelů a integraci SDR do místní sítě a remote provoz.
SDR se dodávaným kabelem připojí buď přímo k PC nebo do routeru.
Integrace do místní sítě je bezproblémová díky tomu, že Colibri SDR nabízí automatické IP adresovaní a v případě potřeby poskytuje DHCP server.
Díky této funkci lze připojit SDR přímo k jednomu PC bez síťového switche. Toto je výhodné např. pro přechodné portable použití na cestách apod.
Colibri SDR samozřejmě umožňuje použití statické IP adresy pro fixní instalace.
Specifikace:
Frekvenční rozsah 9 kHz – 55MHz
Bandscope (Panorama) 62.5MHz
Počet nezávslých přijímačů 2
Šířka spektra pro každý přijímač 39, 78, 156 nebo 312 kHz
ADC width, Sample rate 14 Bit, 125 MS/s
Blocking Dynamic Range 110 dB
IMD3 Dynamic Range 90 dB
I/Q Image Rejection > 110 dB
Internal TXCO 20MHz, ±0.5ppm
External 10MHz Clock source
Audio output (headphones)
Attenuator 0 dB, 20 dB
Input Filter Low Pass 55MHz
Additional audio output (headphones) 32 ohm, 30mW
Napájecí napětí 5V ± 10%
Proudový odběr cca. 700mA
LAN Interface RJ-45, 10/100/1000MBits/s [1], MDI/MDI-X supported
IP V4 DHCP-Server, Client, static IP address
rozměry 64 x 24 x 112 mm
hmotnost 300 g
-----
A compact ColibriDDC receiver was designed to work on HF band 0.09 to 55 MHz, for better performance you can add the internal BPF-module
(160-10M bands). With the help of external filters, ColibriDDC can effectively operate on frequencies up to 800 MHz.
LAN interface allows you to use the receiver remotely via LAN cable and to connect several receivers to one PC at the same time, for various projects.
Also, you can hook up the receiver with the RaspberryPi3 (with installed ExpertRS software) and use it from any place on the Planet, you just have to
have a reliable internet connection.
Note! The basic version of the receiver doesn't include the BPF-module.
Main features and capabilities of the receiver
RX path based on DDC (Direct Down-Conversion) architecture
ExpertRemote system provides full remote control of the receiver
2 software receivers (each up to 312 kHz) + SubRX for each of them (4 slices total) + independent wideband Bandscope up to 62.5 MHz
ExtCTRL connector to control external devices with 7 powerful keys with open collector
100 Mbps Ethernet LAN interface provides fast and reliable connection to PC
TCI interface for seamless connection with third-party software like SDC (with its own Skimmer), LogHX, SWISSLOG and RUMlog, more are coming
Record IQ channel with the bandwidth up to 312 kHz
Receiving in undersampling mode up to 800 MHz (requires external BPF)
High-quality 24-bit audio–DAC installed for the smallest signal delays
Low power consumption, 5V 0.64A
External reference generator input 10 MHz
Small size W 65 x H 26 x L 125 mm
PC requirements
CPU Intel Core i3 1.6 GHz and higher
8GB RAM
Video card, minimum resolution 1024x600, 128 MB, OpenGL 1.5 support and higher
Local network connector 100 Mbps or 1 Gbps
The ExpertSDR2 works with Windows 7-10, OS Linux Ubuntu x64 and macOS 10.12 and newer
Modes* LSB/USB/DSB/CW/AM/SAM/NFM/WFM
Receiving bandwidth, MHz 0.01 - 55 (0.01-62.5)
Receiving bandwidth in all Nyquist zones, MHz 0.01– 800
Spectrum scope bandwidth (up to), MHz 62.5
Amount of independent receiving channels 2
Sensitivity, uV 0.3
Blocking Dynamic Range (BDR), dB 110
IMD3 Dynamic Range, dB 90
Image channel suppression, dB >110
Supply voltage range, V 4.5...5.5
Maximum consumption current, A 0.64
RF ADC clock frequency, MHz 125
RF ADC resolution, bit 14
Local oscillator stability, ppm +/- 0.5
Built-in attenuator, dB 0, -20
Built-in audio DAC resolution, bit 24
Dimensions W x H x L, mm 64x24x112
Weight, kg 0.3
* More modes can be supported via external software
Specifications are subject to change without notice or obligation and specifications are only guaranteed within the amateur radio bands.
