DIAMOND CP-6S vertikál na 6 pásem KV+50MHz
Trap. vertikál 80/40/20/15/10/6 m, trap.radiály, L=4,8, PL kon
Cena s DPH 444,31 €
Cena bez DPH367,20 €
| ks | |
| Odkazy |
Trap. vertikál 80/40/20/15/10/6 m, trap.radiály, L=4,8, PL konektor
osvědčená vertikální anténa s malými nároky na prostor.
Standardní verze s radiiálem na CW část pásma 80m, lze doladit v rozsahu asi 3500 - 3550 kHz.
Verze S je nově dodávána s materiálem, umožňujícím izolovanou instalaci antény na stožáru.
To zmenšuje vliv stožáru na anténu a zjednodušuje ladění radiálů.
V balení je i krátký kabel s tlumivkou.
Za příplatek je možné přiobjednat radiály
R1 na rozsah 3575 to 3650 kHz (pro DIGI módy a spodní část SSB pásma)
R2 na rozsah 3650 to 3725 kHz (pro SSB pásmo)
-----
Diamond multiband vertical HF antenna with shortened radials for 6, 10, 15, 20, 40, 80m. Total height only 4.8m, length of radials approx. 1.8m.
Usual high quality finish and easy mounting, as known by Diamond products. Max. power load 200 W PEP, SWR <1.5, tuneable by adjusting lengths of radials.
Includes mast clamps (30 to 62mm) and PL connector. The radials can be installed on one side only if space restriction requires.
The radiator of the CP-6 is DC-grounded which gives a good protection against static charges and nearby lightnings.
Please note the variants of the 80m radial. The new "S" version includes material which allows an isolated installation of the antenna to the mast.
This reduces the influence of the mast to resonance of the radials, which in turn eases the tuning of the radials. For the same reason a short cable with a
choke is included in the shipment.
CP-6 80m Radials
Standard 80m Radial as supplied with CP-6 (Article 11225)
The standard 80m radial is tuned to around the lower end of the 80m band, i.e. the CW DX range from approx. 3490 to 3520 kHz. This radial can be tuned up to
approx. 3550 kHz.
R-1 Radial
Optional 80m radial for 3575 to 3650 kHz for CP-6. For a better resonance match in the upper CW range, digimodes range and lower SSB range.
Replaces the supplied standard radial.
R-2 Radial
Optional 80m radial for 3650 to 3725 kHz for CP-6. For a better resonance match in the lower and mid SSB range. Replaces the supplied standard radial,
included in article 11225.R.
osvědčená vertikální anténa s malými nároky na prostor.
Standardní verze s radiiálem na CW část pásma 80m, lze doladit v rozsahu asi 3500 - 3550 kHz.
Verze S je nově dodávána s materiálem, umožňujícím izolovanou instalaci antény na stožáru.
To zmenšuje vliv stožáru na anténu a zjednodušuje ladění radiálů.
V balení je i krátký kabel s tlumivkou.
Za příplatek je možné přiobjednat radiály
R1 na rozsah 3575 to 3650 kHz (pro DIGI módy a spodní část SSB pásma)
R2 na rozsah 3650 to 3725 kHz (pro SSB pásmo)
-----
Diamond multiband vertical HF antenna with shortened radials for 6, 10, 15, 20, 40, 80m. Total height only 4.8m, length of radials approx. 1.8m.
Usual high quality finish and easy mounting, as known by Diamond products. Max. power load 200 W PEP, SWR <1.5, tuneable by adjusting lengths of radials.
Includes mast clamps (30 to 62mm) and PL connector. The radials can be installed on one side only if space restriction requires.
The radiator of the CP-6 is DC-grounded which gives a good protection against static charges and nearby lightnings.
Please note the variants of the 80m radial. The new "S" version includes material which allows an isolated installation of the antenna to the mast.
This reduces the influence of the mast to resonance of the radials, which in turn eases the tuning of the radials. For the same reason a short cable with a
choke is included in the shipment.
CP-6 80m Radials
Standard 80m Radial as supplied with CP-6 (Article 11225)
The standard 80m radial is tuned to around the lower end of the 80m band, i.e. the CW DX range from approx. 3490 to 3520 kHz. This radial can be tuned up to
approx. 3550 kHz.
R-1 Radial
Optional 80m radial for 3575 to 3650 kHz for CP-6. For a better resonance match in the upper CW range, digimodes range and lower SSB range.
Replaces the supplied standard radial.
R-2 Radial
Optional 80m radial for 3650 to 3725 kHz for CP-6. For a better resonance match in the lower and mid SSB range. Replaces the supplied standard radial,
included in article 11225.R.
