Můžete se přihlásit anebo si založit konto
CZK Košík

ICOM AH-705

ICOM AH-705
ant. tuner k IC-705

Cena s DPH 8 990,00 CZK

Cena bez DPH7 429,75 CZK

ks
Odkazy
automatický anténní tuner navržený pro IC-705.
Vyladí všechny antény napájené koax. kabelem, dlouhé dráty s balunem apod.

napájení z 2x 1,5V AA baterie (3V) nebo z vnějšího zdroje 12V
proudový odběr cca 1mA v klidu a 300 mA během ladění

frekv. rozsah 1,8 - 54 MHz
max. výkon 10W
min. ladicí výkon 5W
počet pamětí 45
barva černá
hmotnost 450g
rozměry 190 x 105 x 40 mm

součástí balení je ovládací kabel s 3,5mm jack konektory a koax. kabel s BNC konektory, oba 2m dlouhé

EU verze je opatřena UHF konektorem (SO239 - protějšek PL)

-----

The AH-705 matches the IC-705 exactly - in size, low power consumption and technical specifications.
The tuner matches all coax-fed antennas, for example end-fed wires with balun, or even a dipole at the
edge of resonance. Exactly what you need for portable operation.

The Autmatik tuner fits perfectly into the LC-192 backpack, which has a compartment at the top for the
transceiver. So you always have everything at hand. The AH-705 is powered either by built-in alkaline
batteries (2 x size 'AA' or 'LR6') or by an external 12V power supply. The power consumption is approx.
1 mA at rest and approx. 300 mA during tuning. As usual with automatic tuners, once found tuning steps
are stored in an internal memory. This speeds up the re-tuning process considerably.

The scope of delivery includes a control cable (2x 3.5mm jack plugs) and a coaxial cable (2x BNC plugs),
both cables are approx. 2m long. This allows you to mount the tuner close by, for example on a small mast.
For mounting, a bracket is included in the delivery, which can be screwed onto the tuner. With this tuner
and a strap or cable tie, the tuner can be mounted quickly. The European version comes with a PL plug
(PL-259) .

A long piece of wire or a good and short earth connection is recommended as a counterweight.
Antennas can be dipoles or end-fed wires, but also tuned verticals that should be operated slightly
outside the resonance. Operation on the 160 m band requires an antenna with at least 30 m length,
on bands from 80 m an antenna with at least 8 m length is suggested. The tuner can be used on the
frequencies 1.8 to 54 MHz. A power of approx. 5 W is required for tuning, max. transmit power 10 W.

Min. Tune Power (W) 5 W
Supply Voltage 3V / 12 V
Supply Voltage [V] 3 / 12 V
Number of Memories 45
Tuner type Automatic Tuning
Color Black
Brand Icom
Weight 450 g
Max. Power [W] 10 W
Frequency Range 1.8 - 54 MHz
Documentation Languages EN
Size W x H x D 190 x 105 x 40 mm