ELECRAFT KX2-F - mini KV transceiver
Nejmenší plnohodnotný KV TCVR na světě
ultrakompaktní KV transceiver
Pásma 80-10 m, výkon 0,1-10 W,
Rozměry 7,1x14,7x3,8 cm, hmotnost pouze 0,3 kg
Aktuální ceny se mohou v důsledku změn kurzů lišit a budou potvrzeny na dotaz e-mailem.
-----
KX2 “stealth” transceiver can go wherever your imagination takes you.
Thanks to state-of-the-art construction techniques, it’s only 5.8 x 2.8 x 1.5” and weighs just 13 ounces—making it the smallest full-featured HF radio on the planet.
KX2 Quick Specs
• Only 13 oz. (0.3 kg) – ideal for portable and hand-held operation
• Internal 2.6 Ah, 11 V Li-ion battery option
• Internal wide-range ATU option
• Current drain as low as 135 mA
• Built-in microphone and speaker
• Advanced DSP provides dual watch, noise reduction, noise
blanking, autonotch, stereo audio
• Versatile software-defined radio (SDR) architecture
• Operates in data modes (PSK31/RTTY) with or without a PC
• New KXPD2 compact keyer paddle
STANDARD FEATURES
•
80-10 meter ham bands; general coverage receive from 3-32.0MHz (also covers 0.5 to 3 MHz with reduced sensitivity)
•
All modes: SSB, CW, and Data (four sub-modes)
•
Ultra-compact size: 2.8”H x 5.8”W x 1.5”D; 13 oz (less options); low-profile knobs and feet for minimum height
•
Rear tilt foot provides 3-point mount for rugged terrain
•
Custom high-contrast LCD with alphanumeric text display
•
Current drain as low as 135 mA in receive mode
•
High-performance 32-bit floating-point DSP
•
Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle
•
Synthesizer has 1-Hz tuning resolution
•
Integrated numeric keypad for direct frequency entry
RECEIVER
•
Software-defined-radio (SDR) architecture for versatility
•
Switchable preamp and attenuator
•
8-band RX EQ
•
Simultaneous dual receive over up to +/- 23 kHz for split-DX operation
•
Built-in speaker; stereo jack for headphones or powered speakers
•
Easy-to-use Passband Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings
•
Auto-notch removes interfering carriers; adjustable noise reduction and noise blanking; stereo audio effect
•
Center-tuning indicator for CW and data modes; auto-spot
TRANSMITTER
•
Up to 10 W on 80-15 m, 8 W on 12 and 10 m (typ.)
•
100 W with KXPA100 amplifier
•
Rugged, SWR- and temperature-protected final amplifier stage
•
Use with built-in mic or MH3 (with UP/DN VFO functions)
•
Optional KXPD2 keyer paddle with adjustable contact spacing; easily removable for transport; built-in allen wrench storage
•
CW keyer with 8-50 WPM range; fast, full-break-in keying
•
Built-in digital voice recorder (DVR) with 2 message memories
•
Three CW/DATA message memories
•
Fast, silent, PIN-diode T-R switching – no noisy relays
•
DSP speech processing for excellent “punch”
•
8-band TX EQ tailors passband to your voice and microphone
OTHER FEATURES
•
General-purpose and per-band memories store VFOs, modes, etc.
•
Computer control via supplied USB or RS232 cable
•
Free firmware updates via provided application software
•
Programmable switch (PFn) for access to an often-used menu entry
•
Full remote-control command set works with popular computer software applications
•
Selectable switch-press tones or full Morse code-based interface
•
Tutorial-style manual ideal for new hams
OPTIONS AND ACCESSORIES
KXAT2 Internal, Wide-Range Automatic Antenna Tuner
KXBT2 Lithium-ion Battery Pack; 11 V, 2.6 Ah. Can be plugged in internally or externally.
KXBC2 External Lithium-ion Fast-Charger for KXBT2 Battery Pack
KXPD2 Attached Precision Keyer Paddle
CS40 & CS60 Compact Padded Carrying Cases. The CS40 is sized for the KX2, a wire antenna, earbuds, keyer paddle, log, and small accessories.
The larger CS60 will accommodate an MH3 mic and more accessories.
MH3 Hand Microphone with UP/DN Controls
KXIO2 Real-Time Clock + General-Purpose Outputs. Clock time-keeping accuracy can be fine-tuned. AUX 1 & 2 outputs are open-drain; for per-band control
of relays to switch antenna coil taps, transverters, etc.
KXPA100 High-Performance 160-6 meter, 100-W Ampflier. See below; also works with other 5 to 10 W transceivers.
KXAT100 Wide-Range 100-W ATU with Dual Antenna Jacks. Mounts inside KXPA100 amplifier.
ultrakompaktní KV transceiver
Pásma 80-10 m, výkon 0,1-10 W,
Rozměry 7,1x14,7x3,8 cm, hmotnost pouze 0,3 kg
Aktuální ceny se mohou v důsledku změn kurzů lišit a budou potvrzeny na dotaz e-mailem.
-----
KX2 “stealth” transceiver can go wherever your imagination takes you.
Thanks to state-of-the-art construction techniques, it’s only 5.8 x 2.8 x 1.5” and weighs just 13 ounces—making it the smallest full-featured HF radio on the planet.
KX2 Quick Specs
• Only 13 oz. (0.3 kg) – ideal for portable and hand-held operation
• Internal 2.6 Ah, 11 V Li-ion battery option
• Internal wide-range ATU option
• Current drain as low as 135 mA
• Built-in microphone and speaker
• Advanced DSP provides dual watch, noise reduction, noise
blanking, autonotch, stereo audio
• Versatile software-defined radio (SDR) architecture
• Operates in data modes (PSK31/RTTY) with or without a PC
• New KXPD2 compact keyer paddle
STANDARD FEATURES
•
80-10 meter ham bands; general coverage receive from 3-32.0MHz (also covers 0.5 to 3 MHz with reduced sensitivity)
•
All modes: SSB, CW, and Data (four sub-modes)
•
Ultra-compact size: 2.8”H x 5.8”W x 1.5”D; 13 oz (less options); low-profile knobs and feet for minimum height
•
Rear tilt foot provides 3-point mount for rugged terrain
•
Custom high-contrast LCD with alphanumeric text display
•
Current drain as low as 135 mA in receive mode
•
High-performance 32-bit floating-point DSP
•
Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle
•
Synthesizer has 1-Hz tuning resolution
•
Integrated numeric keypad for direct frequency entry
RECEIVER
•
Software-defined-radio (SDR) architecture for versatility
•
Switchable preamp and attenuator
•
8-band RX EQ
•
Simultaneous dual receive over up to +/- 23 kHz for split-DX operation
•
Built-in speaker; stereo jack for headphones or powered speakers
•
Easy-to-use Passband Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings
•
Auto-notch removes interfering carriers; adjustable noise reduction and noise blanking; stereo audio effect
•
Center-tuning indicator for CW and data modes; auto-spot
TRANSMITTER
•
Up to 10 W on 80-15 m, 8 W on 12 and 10 m (typ.)
•
100 W with KXPA100 amplifier
•
Rugged, SWR- and temperature-protected final amplifier stage
•
Use with built-in mic or MH3 (with UP/DN VFO functions)
•
Optional KXPD2 keyer paddle with adjustable contact spacing; easily removable for transport; built-in allen wrench storage
•
CW keyer with 8-50 WPM range; fast, full-break-in keying
•
Built-in digital voice recorder (DVR) with 2 message memories
•
Three CW/DATA message memories
•
Fast, silent, PIN-diode T-R switching – no noisy relays
•
DSP speech processing for excellent “punch”
•
8-band TX EQ tailors passband to your voice and microphone
OTHER FEATURES
•
General-purpose and per-band memories store VFOs, modes, etc.
•
Computer control via supplied USB or RS232 cable
•
Free firmware updates via provided application software
•
Programmable switch (PFn) for access to an often-used menu entry
•
Full remote-control command set works with popular computer software applications
•
Selectable switch-press tones or full Morse code-based interface
•
Tutorial-style manual ideal for new hams
OPTIONS AND ACCESSORIES
KXAT2 Internal, Wide-Range Automatic Antenna Tuner
KXBT2 Lithium-ion Battery Pack; 11 V, 2.6 Ah. Can be plugged in internally or externally.
KXBC2 External Lithium-ion Fast-Charger for KXBT2 Battery Pack
KXPD2 Attached Precision Keyer Paddle
CS40 & CS60 Compact Padded Carrying Cases. The CS40 is sized for the KX2, a wire antenna, earbuds, keyer paddle, log, and small accessories.
The larger CS60 will accommodate an MH3 mic and more accessories.
MH3 Hand Microphone with UP/DN Controls
KXIO2 Real-Time Clock + General-Purpose Outputs. Clock time-keeping accuracy can be fine-tuned. AUX 1 & 2 outputs are open-drain; for per-band control
of relays to switch antenna coil taps, transverters, etc.
KXPA100 High-Performance 160-6 meter, 100-W Ampflier. See below; also works with other 5 to 10 W transceivers.
KXAT100 Wide-Range 100-W ATU with Dual Antenna Jacks. Mounts inside KXPA100 amplifier.
