Teleskopický stožár vysoké kvality, tloušťka stěny 1-2mm, naprosto hladký povrch, odolný proti UV, spodní průměr 73mm, horní (konečný) průměr 4mm, (stožár se minimálně prohýbá).
Ideální jako nosič drátových antén, drátových vertikálů, quadů apod. Váha pouhých 6,8kg. Transportní délka 1,7m. 12 segmentů.

-----

high strength professional telescopic fiberglass pole

fully extracted length (height) 18m (60ft)

transportation length 1.70m (5ft 7")
weight
6.8kg (15lbs)
bottom diameter 73mm (2 5/6")
top diameter 4mm (1/6")
wall thickness 1mm - 2mm
(1/25" - 1/12")
number of segments 12
pole material black fiberglass, UV protected
specially reinforced multilayer winding


Spiderbeam 18m (60ft) fiberglass poles are built very similar to our well proven 12m HD fiberglass poles, yet carefully designed to maintain low weight and perfect balance.
The pole starts out very rugged at the bottom (73mm diameter / 2mm wall thickness) and still has 40mm diameter / 1.5mm wall thickness at 10m height! The upper sections are slim and light (1mm wall thickness), preventing the pole from becoming top-heavy and keeping it perfectly balanced. A special reinforcing winding technique - several layers of fiberglass are wound in alternating direction (criss/cross winding) - provides greatly increased lateral and linear strength

These poles are perfect for building all kinds of wire antennas, especially 80/160m wire GP or inverted L antennas. They can also easily support temporary lightweight 1 Element Quad or Delta loops for 40-10m, and dipoles for all bands, especially when used with open wire feedline. (Most baluns would be somewhat heavy). 4-6 poles could be used to build lightweight beams for 40 or 80m (...who is going to build one for 160? :-)).

The best (and cheapest) wire to use for building such wire antennas (verticals, loops, dipoles etc.) is AWG 18 (= 1mm diameter) enameled copper wire or similar.

Pole installation:
One person can easily "walk up" the pole by pressing the bottom against a rock, tree, car or ground anchor, or having a second person hold it. Once the pole is in vertical position, it can easily be moved around.
Fix the bottom to a ground anchor and attach guy lines at 2 levels. Thin fishing monofilament (1mm diameter) or 2mm Kevlar rope is very suitable for guy lines.
To complete the installation we strongly recommend using our rubber padded stainless steel clamps to safely secure the telescoping elements from slipping down. For a pole of this large size, clamps are a better solution than using tape only.


SET PRICE: EACH POLE INCLUDES A FREE STAINLESS STEEL CLAMP SET!


Get your 18m pole today and enjoy successfully putting out a big low-band signal within just a few minutes...