RM HLA-150-PLUS 150W PA
Kompaktní lineární PA 160-10m, 150W
Cena s DPH 11 890,00 CZK
Cena bez DPH9 826,45 CZK
| ks | |
| Odkazy |
Tranzistorový lineární zesilovač,
vhodný pro KX3, FT817, IC-705, SunSDR a jiné QRP TCVR
1,8 - 30 MHz,
šest výstupních filtrů (dolních propustí) automaticky přepínané mikroprocesorem nebo možnost manuální volby filtru (při příjmu)
Indikace relativního výstupního výkonu (LED bar graf na předním panelu)
Ochrana proti vysokému PSV, proti přebuzení a proti přehřátí
Přepínání RX/TX relé buď pomocí vf VOX nebo kabelem PTT
Volba času zpoždění VOX,
volba přídavnému vstupního 3 dB atenuátoru , který sníží cesílení zhruba na polovinu
konektory IN/OUT UHF (SO239)
konektor PTT cinch (RCA)
Vstupní výkon 1 až 10 W
Výstupní výkon: cca 150 W
Provozní režimy: AM, FM, SSB, CW
max. výstupní PSV 2,5: : 1
Napájení: 13,8V
Odběr 30 A max.
Rozměry: Š x V x H 180 x 65 x 290 mm
-----
RM Shortwave Power Amplifiers 150/300Watt
Compact and handy linear power amplifiers for all HF bands from 1.8 to 30MHz, with approx. 150 or 300W output power. These amplifiers work real linear amplifiers and not as a C class device, as many simple CB type amps do.
A special feature the amplifiers have a six-way output low-pass filter, which is switched automatically by micro processor. Additionally this filter can be switched manually (e.g. when receiving).
The relative output power is shown on a bar graph on the front panel. The amplifiers have a protection circuit against high SWR. Transmit/Receive switching can be done either be HF Vox or a PTT cable.
The controls on the front panel allow a selection of the Vox hold time, additionally a 3dB input attenuator can be selected, which reduces the amplification by about 50%.
Connectors: IN/OUT 2x PL, PTT: cinch socket, active low.
The model HLA-150V-Plus has two temperature controlled fans, good for continous operation. The model HLA-300V-Plus has these fans as a standard feature. On high frequencies the output power is slightly reduced,
the model HLA-300V-Plus reaches approx. 250W.
Compact and handy linear power amplifiers for all HF bands from 1.8 to 30MHz, with approx. 300W output power.
These amplifiers work real linear amplifiers and not as a C class device, as many simple CB type amps do. A special feature the amplifiers have
a six-way output low-pass filter, which is switched automatically by micro processor. Additionally this filter can be switched manually (e.g. when receiving).
The relative output power is shown on a bar graph on the front panel. The amplifiers have a protection circuit against high SWR.
Transmit/Receive switching can be done either be HF Vox or a PTT cable. The controls on the front panel allow a selection of the Vox hold time,
additionally a 3dB input attenuator can be selected, which reduces the amplification by about 50%.
Connectors:
IN/OUT 2x PL,
PTT: cinch socket, active low.
Max. Power [W] 150 or 300 W
Amplification (dB) 16.5 ±1
vhodný pro KX3, FT817, IC-705, SunSDR a jiné QRP TCVR
1,8 - 30 MHz,
šest výstupních filtrů (dolních propustí) automaticky přepínané mikroprocesorem nebo možnost manuální volby filtru (při příjmu)
Indikace relativního výstupního výkonu (LED bar graf na předním panelu)
Ochrana proti vysokému PSV, proti přebuzení a proti přehřátí
Přepínání RX/TX relé buď pomocí vf VOX nebo kabelem PTT
Volba času zpoždění VOX,
volba přídavnému vstupního 3 dB atenuátoru , který sníží cesílení zhruba na polovinu
konektory IN/OUT UHF (SO239)
konektor PTT cinch (RCA)
Vstupní výkon 1 až 10 W
Výstupní výkon: cca 150 W
Provozní režimy: AM, FM, SSB, CW
max. výstupní PSV 2,5: : 1
Napájení: 13,8V
Odběr 30 A max.
Rozměry: Š x V x H 180 x 65 x 290 mm
-----
RM Shortwave Power Amplifiers 150/300Watt
Compact and handy linear power amplifiers for all HF bands from 1.8 to 30MHz, with approx. 150 or 300W output power. These amplifiers work real linear amplifiers and not as a C class device, as many simple CB type amps do.
A special feature the amplifiers have a six-way output low-pass filter, which is switched automatically by micro processor. Additionally this filter can be switched manually (e.g. when receiving).
The relative output power is shown on a bar graph on the front panel. The amplifiers have a protection circuit against high SWR. Transmit/Receive switching can be done either be HF Vox or a PTT cable.
The controls on the front panel allow a selection of the Vox hold time, additionally a 3dB input attenuator can be selected, which reduces the amplification by about 50%.
Connectors: IN/OUT 2x PL, PTT: cinch socket, active low.
The model HLA-150V-Plus has two temperature controlled fans, good for continous operation. The model HLA-300V-Plus has these fans as a standard feature. On high frequencies the output power is slightly reduced,
the model HLA-300V-Plus reaches approx. 250W.
Compact and handy linear power amplifiers for all HF bands from 1.8 to 30MHz, with approx. 300W output power.
These amplifiers work real linear amplifiers and not as a C class device, as many simple CB type amps do. A special feature the amplifiers have
a six-way output low-pass filter, which is switched automatically by micro processor. Additionally this filter can be switched manually (e.g. when receiving).
The relative output power is shown on a bar graph on the front panel. The amplifiers have a protection circuit against high SWR.
Transmit/Receive switching can be done either be HF Vox or a PTT cable. The controls on the front panel allow a selection of the Vox hold time,
additionally a 3dB input attenuator can be selected, which reduces the amplification by about 50%.
Connectors:
IN/OUT 2x PL,
PTT: cinch socket, active low.
Max. Power [W] 150 or 300 W
Amplification (dB) 16.5 ±1
