Microtelecom FM+ Broadcast band converter
FM konvertor 87.5÷108 MHz pro použití s SDR Perseus
Cena s DPH 5 990,00 CZK
Cena bez DPH4 950,41 CZK
| ks | |
| Odkazy |
Konvertor vysoké kvality, umožňující příjem VKV FM rozhlasového pásma na SDR přijímači.
Uvedené parametry jsou zaručeny při použití s SDR přijímačem Perseus, kterému je konvertor přizpůsoben i desgnem.
FM+ je vybaven vnitřním anténním přepínačem, který při vypnutém konvertoru připojuje k SDR Perseus KV anténu .
Šířka pásma je nastavitelná od 400 kHz až do 20 kHz pro DX FM provoz.
Frekvenční rozsah: 87.5 ÷ 108 MHz
Šumové číslo: 9 dB
Zisk v rozmezí: ±1dB typ. (pouze konvertor)
Potlačení zrcadlového příjmu: 80 dB (52 ÷ 70 MHz),
>60 dB (70 ÷ 72.5 MHz)
Input P1: -5 dBm typ.
Input IP3: +8 dBm typ.
úroveň omezení -17 dBm (Perseus attenuator set to 0 dB)
napájecí napětí +12 ÷ +13.6 VDC
proudový odběr: 0.25 A
potlačení míst.oscilátoru lepší než -65 dBm
izolace mezi HF In a RF Out: lepší než 90 dB (0 ÷ 30 MHz)
provozní teplota: +5 ÷ 40 °C
-----
----- FM+ is a 87.5÷108 MHz broadcast band converter expressely designed for the Perseus receiver.
It features a very good dynamic range which perfectly matches the Perseus receiver.
The converter is equipped with a control software application suited for FM DXers needs.
The FM+ is equipped with an internal antenna switch for direct connection to an HF antenna when the converter is not used. The FM+ Software performs wide band stereo FM demodulation with RDS decoding of the tuned signal with overall features which are similar to the Perseus software application. The selectivity filter operates at 500 kS/s with a maximum IF bandwidth of 400 kHz and can be narrowed down to 20 kHz for FM DX operations.
Three spectral views are available: RF (RF spectrum view, like in the Perseus software, MUX (demodulated stereo multiplex) and RDS (showing the RDS signal spectrum if present).
Shown RDS information are station name, program type and PI code.
NEW! FM+ Software v1.0b (29 July 2011 - 3.15 MB .zip file)
You will need the activation code printed on the original CD to activate your copy (requires registration and the FM+ converter if used either than in playback mode).
Technical Specifications (*)
FM+ Software
The FM+ Software performs wide band stereo FM demodulation with RDS decoding of the tuned signal with overall features which are similar to the Perseus software application.
The selectivity filter operates at 500 kS/s with a maximum IF bandwidth of 400 kHz and can be narrowed down to 20 kHz for FM DX operations.
The FM+ is equipped with an internal antenna switch for direct connection to an HF antenna when the converter is not used.
Tuning Range: 87.5 ÷ 108 MHz
Noise Figure: 9 dB
Gain Flatness: ±1dB typ. (converter only)
Image Rejection: 80 dB (52 ÷ 70 MHz),
>60 dB (70 ÷ 72.5 MHz)
Input P1: -5 dBm typ.
Input IP3: +8 dBm typ.
Clipping Level: -17 dBm (Perseus attenuator set to 0 dB)
Voltage Supply: +12 ÷ +13.6 VDC
Current Sink: 0.25 A
LO-FM Input Feedthrough: better than -65 dBm
HF In to RF Out Isolation: better than 90 dB (0 ÷ 30 MHz)
Operating Temperature Range: +5 ÷ 40 °C
Uvedené parametry jsou zaručeny při použití s SDR přijímačem Perseus, kterému je konvertor přizpůsoben i desgnem.
FM+ je vybaven vnitřním anténním přepínačem, který při vypnutém konvertoru připojuje k SDR Perseus KV anténu .
Šířka pásma je nastavitelná od 400 kHz až do 20 kHz pro DX FM provoz.
Frekvenční rozsah: 87.5 ÷ 108 MHz
Šumové číslo: 9 dB
Zisk v rozmezí: ±1dB typ. (pouze konvertor)
Potlačení zrcadlového příjmu: 80 dB (52 ÷ 70 MHz),
>60 dB (70 ÷ 72.5 MHz)
Input P1: -5 dBm typ.
Input IP3: +8 dBm typ.
úroveň omezení -17 dBm (Perseus attenuator set to 0 dB)
napájecí napětí +12 ÷ +13.6 VDC
proudový odběr: 0.25 A
potlačení míst.oscilátoru lepší než -65 dBm
izolace mezi HF In a RF Out: lepší než 90 dB (0 ÷ 30 MHz)
provozní teplota: +5 ÷ 40 °C
-----
----- FM+ is a 87.5÷108 MHz broadcast band converter expressely designed for the Perseus receiver.
It features a very good dynamic range which perfectly matches the Perseus receiver.
The converter is equipped with a control software application suited for FM DXers needs.
The FM+ is equipped with an internal antenna switch for direct connection to an HF antenna when the converter is not used. The FM+ Software performs wide band stereo FM demodulation with RDS decoding of the tuned signal with overall features which are similar to the Perseus software application. The selectivity filter operates at 500 kS/s with a maximum IF bandwidth of 400 kHz and can be narrowed down to 20 kHz for FM DX operations.
Three spectral views are available: RF (RF spectrum view, like in the Perseus software, MUX (demodulated stereo multiplex) and RDS (showing the RDS signal spectrum if present).
Shown RDS information are station name, program type and PI code.
NEW! FM+ Software v1.0b (29 July 2011 - 3.15 MB .zip file)
You will need the activation code printed on the original CD to activate your copy (requires registration and the FM+ converter if used either than in playback mode).
Technical Specifications (*)
FM+ Software
The FM+ Software performs wide band stereo FM demodulation with RDS decoding of the tuned signal with overall features which are similar to the Perseus software application.
The selectivity filter operates at 500 kS/s with a maximum IF bandwidth of 400 kHz and can be narrowed down to 20 kHz for FM DX operations.
The FM+ is equipped with an internal antenna switch for direct connection to an HF antenna when the converter is not used.
Tuning Range: 87.5 ÷ 108 MHz
Noise Figure: 9 dB
Gain Flatness: ±1dB typ. (converter only)
Image Rejection: 80 dB (52 ÷ 70 MHz),
>60 dB (70 ÷ 72.5 MHz)
Input P1: -5 dBm typ.
Input IP3: +8 dBm typ.
Clipping Level: -17 dBm (Perseus attenuator set to 0 dB)
Voltage Supply: +12 ÷ +13.6 VDC
Current Sink: 0.25 A
LO-FM Input Feedthrough: better than -65 dBm
HF In to RF Out Isolation: better than 90 dB (0 ÷ 30 MHz)
Operating Temperature Range: +5 ÷ 40 °C
