Stavebnice kompaktního TCVR - modulární - bez letování

ultrakompaktní KV transceiver jako stavebnice bez pájení!
Pásma 160-6 m, výkon 0,1-10 W, parametry odpovídající standardním moderním KV zařízením.

Rozměry 8,7x18,8x4,4 cm, hmotnost 0,51 kg (bez příslušenství).

Ceny a dodací lhůty doplňků (option) na dotaz

-----

Ultra-Compact Home/Portable/Mobile Station
The revolutionary Elecraft KX3 puts the world in the palm of your hand! Despite its small size, it covers all amateur bands from 160-6 meters, operates in all modes, and has DSP-based features usually found only on larger radios.

The KX3’s unique form-factor allows you to operate from anywhere. Fold out the rear tilt-feet for use on a desktop or picnic table, or add our rugged mobile mount bracket for vehicle use. For extreme portability, you can add the internal wide-range ATU, 8-AA cell battery pack with NiMH charger, and adjustable KXPD3 keyer paddle. With a whip antenna, you can even operate hand-held.

In receive mode, current drain can be as low as 150 mA – about one-half to one-third that of competing all-band portables. Transmit efficiency is also excellent, further improving battery life.

Full-Featured, yet Easy to Use
The KX3 features a large front panel with all controls optimized for convenient use. You won’t have to dig through menus to set the power level, adjust the keyer speed, or change filter settings. And the KX3 has the same full-size display as the Elecraft K3, so all operating information is available at a glance.

The KX3’s tutorial-style manual explains how and why controls are used, so new hams will be experts in no time. Of course you’ll also have Elecraft’s legendary customer support, and free firmware upgrades via the internet.

KXPA100 External 100-Watt Amplifier
Our high-performance KXPA100 home/mobile amplifier seamlessly integrates with the KX3 as well as other popular 5- to 10-W transceivers. It has its own internal ATU option (KXAT100) with dual antenna jacks.


KX3 STANDARD FEATURES
160-6 meter ham bands; general coverage from 0.5-30 MHz
All modes: SSB, CW, Data (four sub-modes), AM, FM
Ultra-compact size: 3.4”H x 7.4”W x 1.7”D; 18 oz. (less options)
Rear tilt feet fold up for transport
Custom high-contrast LCD with alphanumeric text display
Current drain as low as 150 mA in receive mode
High-performance 32-bit floating-point DSP
Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle
Low-noise synthesizer with 1-Hz tuning resolution
Firmware updateable via provided application software

RECEIVER
Quadrature down-sampling mixer compatible with PC-based SDR (software defined radio) applications
Receiver I/Q outputs for use with PC soundcard
Dual roofing filter option for enhanced dynamic range. (500/1500 Hz analog filters; effective IF b/w of 1000/3000 Hz)
Switchable preamp and attenuator
8-band receive audio equalizer
Dual watch over +/- 10 kHz range; uses applicable roofing filter
Easy-to-use PassBand Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings
Automatic and manual notch filtering; adjustable noise reduction and noise blanking; binaural audio effects for enhanced receive
Center-tuning indicator for CW and data modes
Built-in speaker; stereo jack for headphones/external speakers

TRANSMITTER
Adjustable output, 0.1 to 10 W+ (100 W+ with KXPA100 amp)
Rugged, SWR and temperature-protected final amplifier stage
Optional MH3 microphone with PTT and UP/DOWN functions
Optional attached keyer paddle with spacing adjustment
Switchable PA output impedance for efficient 5-W or 10-W use
Fast, silent, PIN-diode T-R switching – no relays
DSP RF speech processing for excellent “punch”
8 band equalizer tailors passband to your voice and microphone

OTHER FEATURES
Built in digital voice recorder (DVR) with two message buffers
Internal CW keyer with 8-50 WPM range
Six CW/DATA message memories
100 general-purpose memories store VFOs, modes, etc.
Computer control via supplied USB cable or optional RS-232 cables
Full remote-control command set works with most amateur radio software applications (emulates Elecraft K3)
One-click firmware upgrades via the web (with free PC software)
Optional mobile bracket compatible with RAM-mounts
Tutorial-style manual ideal for new hams

OPTIONS and ACCESSORIES
KXFL3 Roofing Dual Bandwidth Filter for SSB/CW/DATA
KXAT3 Internal, Wide-Range 20-W Automatic Antenna Tuner
KXBC3 Internal 8-AA Cell Battery Pack with NiMH Charger
(batteries not supplied; non-rechargeables can also be used)
KX3-2M Internal 2-Meter Module
KXMM3 Mobile Mount Bracket (see below); for use with an appropriate RAM-mount™ or equivalent (not shown)
MH3 Hand Microphone with UP/DN Controls
KXPD3 Atached Precision Keyer Paddle
KXPA100 High-Performance 160-6 meter, External 100-W Ampflier
(see below); usable with most 5 to 10 W transceivers
KXAT100 Wide-Range 100-W ATU with Dual Antenna Jacks
(attaches to KXPA100 module)