Microbit Remoterig 1258MkIIs Set
komplet set pro ovl. tcvru přes internet
Cena s DPH 11 590,00 CZK
Cena bez DPH9 578,51 CZK
| Odkazy |
Kompletní sestava hardware a software s kompletní kabeláží pro dálkové ovládání transceiverů přes internet.
-----
The Remoterig RRC-1258MkII is the main product which can be used in most system configurations.
Remoterig RRC-1258MkII system can be used in many different ways. The most important configurations are listed below.
Control panel mode
The most common way of using the system is with radios which have detachable control panels. With those radios you keep the real radio feeling as the system works exactly as if you have the control panel connected direct to the radio. And the most important thing is that no PC.s are needed at all. The Remoterig are tested and supports the following rigs with detachable control panels:
Kenwood: TS-480, TM-D710, TS-2000
Yaesu: FT-857,FT-8800, FT-8900
ICOM: IC-703, IC-706, IC-R2500, IC-2725, IC-2820, ID-E880
Alinco: DX-SR8
(Note ! IC-7000 can NOT be used in this mode as the display info is sent as analog video signal.)
Elecraft K3- Twin Concept
The Elecraft K3 Twin concept gives the same feeling as the control panel mode. The Elecraft K3 Twin concept is a high end concept for the serious ham who do not accept any compromise even when remote controlling his station. You can use the K3/0, K3/10 or K3/100 as control. The K3/0 is a specially design control unit.
Yaesu Twin Concept
The Yaesu Twin concept gives the same feeling as the Control panel mode above as you use a second transceiver as control “panel”. This is of course a more expensive way of remote controlling but it gives you the posibility to use the best radios available on the market even for remote control. This mode supports FT-450, FT-950, FT-2000, FT-5000 and FT-9000 even in cross combinations.
No PC.s are needed in this configuration either.
Replacing traditional PC-Remote control
The Remoterig system supports more traditional PC controlled remote control also, with the important difference that you do not need a PC on the Remote site. Most radios with some kind of serial remote control interface from Kenwood, ICOM,Yaesu, Elecraft, Tentec etc are supported
PC-remote control
We also have a system called RRC-Micro which not need a Remoterig box in the control end, only a PC is needed with a our software client and the small USB-PTT/audio box. This system is very handy to use when traveling for example as you can use you laptop and connect to wireless LANs or mobile networks where ever you are.
--
RRC-1258MkIIs (dualRX) is sold in pairs assembled tested but not configured. Included in the package is one USB cable, Power cables (2 pc), Cat 5 cable for making IC-706 cable and a 2xRJ-45 extender.
Separate Control- or Radio boxes are also available in the Webshop.
Cables for the major Radio models can be bought from the Webshop
RRC-1258MkIIs v7 is sold in pairs assembled tested but not configured. Included in the package is one USB cable, Power cables (2 pc), 0.5 m Cat 5 cable and a 2xRJ-45 extender.
Pinheader for WiFi unit is in place
-----
The Remoterig RRC-1258MkII is the main product which can be used in most system configurations.
Remoterig RRC-1258MkII system can be used in many different ways. The most important configurations are listed below.
Control panel mode
The most common way of using the system is with radios which have detachable control panels. With those radios you keep the real radio feeling as the system works exactly as if you have the control panel connected direct to the radio. And the most important thing is that no PC.s are needed at all. The Remoterig are tested and supports the following rigs with detachable control panels:
Kenwood: TS-480, TM-D710, TS-2000
Yaesu: FT-857,FT-8800, FT-8900
ICOM: IC-703, IC-706, IC-R2500, IC-2725, IC-2820, ID-E880
Alinco: DX-SR8
(Note ! IC-7000 can NOT be used in this mode as the display info is sent as analog video signal.)
Elecraft K3- Twin Concept
The Elecraft K3 Twin concept gives the same feeling as the control panel mode. The Elecraft K3 Twin concept is a high end concept for the serious ham who do not accept any compromise even when remote controlling his station. You can use the K3/0, K3/10 or K3/100 as control. The K3/0 is a specially design control unit.
Yaesu Twin Concept
The Yaesu Twin concept gives the same feeling as the Control panel mode above as you use a second transceiver as control “panel”. This is of course a more expensive way of remote controlling but it gives you the posibility to use the best radios available on the market even for remote control. This mode supports FT-450, FT-950, FT-2000, FT-5000 and FT-9000 even in cross combinations.
No PC.s are needed in this configuration either.
Replacing traditional PC-Remote control
The Remoterig system supports more traditional PC controlled remote control also, with the important difference that you do not need a PC on the Remote site. Most radios with some kind of serial remote control interface from Kenwood, ICOM,Yaesu, Elecraft, Tentec etc are supported
PC-remote control
We also have a system called RRC-Micro which not need a Remoterig box in the control end, only a PC is needed with a our software client and the small USB-PTT/audio box. This system is very handy to use when traveling for example as you can use you laptop and connect to wireless LANs or mobile networks where ever you are.
--
RRC-1258MkIIs (dualRX) is sold in pairs assembled tested but not configured. Included in the package is one USB cable, Power cables (2 pc), Cat 5 cable for making IC-706 cable and a 2xRJ-45 extender.
Separate Control- or Radio boxes are also available in the Webshop.
Cables for the major Radio models can be bought from the Webshop
RRC-1258MkIIs v7 is sold in pairs assembled tested but not configured. Included in the package is one USB cable, Power cables (2 pc), 0.5 m Cat 5 cable and a 2xRJ-45 extender.
Pinheader for WiFi unit is in place
