Antény britského výrobce InnovAntennas (G0KSC) se pro své kvality stávají standardem pro nejnáročnější aplikace, jako jsou EME, závodní a DX superstanice.
InnovAntennas využívají pro návrh svých antén nejmodernější počítačové technologie ve spojení s metodami "Particle Swarm Optimisation" (považované za nejlepší optimalizační technologii současnosti).
Výsledkem jsou inovace nabízející nejvýkonější anténní systémy, které jsou v současné době k dispozici.
Exkluzivní návrhy špičkových anténnářů světa byly přetvořeny v profesionálně vyrobené mechanicky vynikající antény.
Vyrábí se několik variant každého modelu, aby se vyhovělo praktickým požadavkům komerčních i amatérských uživatelů.
Základní tech.údaje
Zisk - 7,47dBi @ 28,500MHz
Max. zisk: 7,50dBi
Předozadní poměr : 13,44dB @ 28,500MHz
Předozadní poměr max. : 14,23dB
Zatižitelnost: 5kw
SWR: Lepší než 1.3:1 od 28,000MHz do 28,600MHz
Délka ráhna: 2,1m
Hmotnost: 4,84Kg / 10,67LB
-----
A 3 element wideband 28-28.7MHz OP-DES (Opposing Phase Driven Element System) Yagi
The OP-DES is the newest in patent technology produced by InnovAntennas and is specifically designed for maximum performance, wide-band HF applications. Read more about the OP-DES Yagi Here. InnovAntennas use the latest in Electromagnetic Design Technology to ensure the very best results and the OP-DES Yagi is proof of that!
This antenna has a flat SWR curve covering 28-28.600MHz at 1.2:1 SWR.
Performance
Gain: 7.47dBi @ 28.500MHz
F/B: 13.44dB @ 28.500MHz
Peak Gain: 7.50dBi
Gain at 10m above Ground: 12.64dBi
Peak F/B: 14.23dB
Power Rating: 5kw
SWR: Below 1.3:1 from 28.000MHz to 28.600MHz
Stacking Distance: 5.0-6.5m ( 6.0m recommended)
2 Stacked Gain @ 6.0m spacing: 10.51dBi
2 Stacked F/B: 12.20dB
2 Stacked Gain @ 6.0m Spacing 10m above ground: 15.43dBi
Boom Length: 2.1m
Weight: 4.84Kg / 10.67LB
Turning Radius: 4.84m / 10.67ft
Wind Loading: 0.15 Square Metres / 1.64 Square feet
Wind Survival: 143KPH / 89MPH
Other options available if higher wind loading/survival is required.
Specification
This antenna is made 5/8 inch (15.88mm) center elements and 1/2 inch (12.7mm) outer elements with the OP-DES end sections 3/8 inch (9.525mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 1.25 inch square 16SWG aluminum.
OTHER TAPER SCHEDULES ARE AVAILABLE FOR THIS ANTENNA, CALL OR EMAIL FOR DETAILS
Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts.
Note: much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up or our antennas have least effect on performance and pattern degradation. More information can be found here
•Marine grade Stainless Steel Fittings
•Original Stauff Insulation clamps
•Mill finished boom and elements for highest levels of accuracy