WIMO Line isolator 200W art.11368
line isolator - vf tlumivka na koax,
eliminuje nežádoucí proudy tekoucí po plášti koax. kabelu, které způsobují
deformaci vyzařovacího diagramu, rušení a snížení účinnosti antén.
max 200W PEP, nesymetrický vstup/výstup, konektor, 1-30 MHz, hermeticky těsný, zalitý, konektor SO239 (PL)
-----
Useful to reduce common mode currents (and thereby reducing TVI/BCI) on coax feed lines. Much higher inductivity and better efficiency than a cable coil.
Weatherproof sealed case, connector PL. Best used right at the antenna feed point. PL/PL connector included.
Note:Max. power load is relative to use at 50 ? systems. When used behind a tuner with higher voltages use model with higher power load.
eliminuje nežádoucí proudy tekoucí po plášti koax. kabelu, které způsobují
deformaci vyzařovacího diagramu, rušení a snížení účinnosti antén.
max 200W PEP, nesymetrický vstup/výstup, konektor, 1-30 MHz, hermeticky těsný, zalitý, konektor SO239 (PL)
-----
Useful to reduce common mode currents (and thereby reducing TVI/BCI) on coax feed lines. Much higher inductivity and better efficiency than a cable coil.
Weatherproof sealed case, connector PL. Best used right at the antenna feed point. PL/PL connector included.
Note:Max. power load is relative to use at 50 ? systems. When used behind a tuner with higher voltages use model with higher power load.
