sofistikovaný digitální měřič výkonu, SWR, impedance, síly pole,

-měření dopředného a odraženého výkonu (rychlý bargraf)
-zobrazení číselné hodnoty dopředného výkonu (FORWARD) v rozsahu 50mW až 3000W s přesností na 2 desetinná místa,
automatické přepínání rozsahu
-zobrazení odraženého výkonu (REFL) nebo PSV (SWR) na 2 desetinná místa

Tlačítka
- Mode - funkce normal, Vector Impedance, dBm/RL, Field Strength (dBm), Compression
- Alarm mode - umožňuje nastavit úroveň akustického alarmu při překročení nastavené hodnoty SWR
- Power mode - Střední výkon (AVG), špičkový (Peak), Režim ladění (Tune-Pulser)
- volba sensoru (standardně dodáván s odděleným sensorem LPC1, 3KW PEP/CW**, 1.8 to 54 MHz.
LP-100A pracuje s jedním nebo dvěma oddělenými sensory (Konektory SO239 (UHF) a dva kabeůly s BNC konektory pro propojení s měřicí jednotkou)

Options - lze přiobjednat za příplatek tyto varianty sensorů:
LPC2 0.10W to 5KW CCS*, 1.8 to 30 MHz
LPC4 0.10W to 5KW PEP/CW**, 1.8 to 54 MHz
LPC5 0.20W to 10KW PEP/CW**, 1.8 to 30 MHz

* CCS refers to continuous duty (key down).
** PEP/CW refers to 50% duty cycle typical of most ham modes.

-----

LP-100A Digital Vector Wattmeter
Simple to use... lab quality... groundbreaking features. Much more than just a wattmeter. 11 band NIST traceable
calibration.

Everything you need for critical station monitoring, tuning and protection on one screen. No other meter has
dual bargraphs, OR a graphic display with solid bargraphs, OR bargraph with 90 bars for fine tuning of Power
and SWR, OR an SWR alarm with snooze mode, OR a "sticky" bar for graphic peak hold indication...
let alone having them all on one screen! This is by far the best display for tuning a manual tuner, without having
to change display mode for normal operation. It is also the only meter with 11 bands of frequency indexed NIST
traceable calibration points using a built-in frequency counter.

Plus, the LP-100A has additional modes no other wattmeter has when you desire them... vector impedance,
dBm/RL, calibrated field strength and compression ratio.

Dual Coupler Option Two couplers... one LP-100A... auto-sensing... perfect for SO2R. Better than "paralleled"
couplers because the couplers are isolated from each other, and each has its own Calibration table

Simple yet highly customizable... all functions and user preferences can be set from the Setup display.
Plus supplied Windows® software for extended capabilities like automated SWR and Impedance plotting,
antenna pattern plotting, internet remote control and more when connected to a PC!
A truly unique and innovative design. We didn't just stick a digital display on an old fashioned design.
Compare to any meter at any price! There is nothing else like the LP-100A on the market.
Please take the time to read this entire page (and links, including the extensive manual) for a summary of
features and performance data of this station monitoring and antenna measurement system.

The graphic VFD display used in the LP-100A is the highest quality display used in a digital wattmeter.
It is manufactured in Japan by Noritake, the inventor of VFD, at their own facilities... not in China. In almost
4 years of production of the LP-100A, we have not had a single display failure, or even a report of wear.
The quality and reliability of the display, combined with unique screen saver options, adds up to a lifetime
of enjoyment. *

We think you'll agree... the LP-100A is in a class by itself.

- Fwd & Net Power - 50mW to 3KW Autoranging

- SWR, R+j|X|, Reflected Power

- 1.8-54 MHz with frequency counter
for per-band corrections of all parameters

- Long life, high resolution Graphic VFD display

- Simultaneous POWER and SWR bargraphs

- dBm/RL scales with 0.1 dB steps

- Calibrated field strength input (-15 to +33dBm)

- Dual coupler option w/ auto-sensing and two CAL tables

- SWR alarm w/PTT disable & snooze button

- Serial port w/Windows® control & plotting software

- 5KW & 10KW optional couplers

- Mode for measuring speech compression

- 11 Band NIST traceable calibration

- Flash upgradeable