Antény britského výrobce InnovAntennas (G0KSC) se pro své kvality stávají standardem pro nejnáročnější aplikace, jako jsou EME, závodní a DX superstanice.
InnovAntennas využívají pro návrh svých antén nejmodernější počítačové technologie ve spojení s metodami "Particle Swarm Optimisation" (považované za nejlepší optimalizační technologii současnosti).
Výsledkem jsou inovace nabízející nejvýkonější anténní systémy, které jsou v současné době k dispozici.
Exkluzivní návrhy špičkových anténnářů světa byly přetvořeny v profesionálně vyrobené mechanicky vynikající antény.
Vyrábí se několik variant každého modelu, aby se vyhovělo praktickým požadavkům komerčních i amatérských uživatelů.
Základní tech.údaje
Zisk - 7,46dBi @ 14,150MHz
Max. zisk: 7,52dBi
Předozadní poměr : 13,50dB @ 14,150MHz
Předozadní poměr max. : 14,20dB
Zatižitelnost: 5kw
SWR: Lepší než 1.3:1 od 14,000MHz do 14,350MHz
Délka ráhna: 4,2m
Hmotnost: 11,06Kg / 24,38LB
-----
A 3 element wideband 14MHz OP-DES (Opposing Phase Driven Element System) Yagi
The OP-DES is the newest in patent technology produced by InnovAntennas and is specifically designed for maximum performance, wide-band HF applications. Read more about the OP-DES Yagi Here. InnovAntennas use the latest in Electromagnetic Design Technology to ensure the very best results and the OP-DES Yagi is proof of that!
This antenna has a flat SWR curve covering 14.000 - 14.350MHz at 1.3:1 SWR.
Performance
Gain: 7.46dBi @ 14.150MHz
F/B: 13.5dB @ 14.150MHz
Peak Gain: 7.52dBi
Gain at 20m above Ground: 12.66dBi
Peak F/B: 14.2dB
Power Rating: 5kw
SWR: Below 1.3:1 from 14.000MHz to 14.350MHz
Boom Length: 4.2m
Weight: 11.06Kg / 24.38LB
Turning Radius: 5.790m / 18.99ft
Wind Loading: 0.4 Square Metres / 4.35 Square feet
Wind Survival: 146KPH / 91MPH
Other options available if higher wind loading/survival is required.
Stacking Distance: 9 - 12m ( 11m recommended)
2 Stacked Gain @ 11m spacing: 10.49dBi
2 Stacked F/B: 12.18dB
2 Stacked Gain @ 11m Spacing 20m above ground: 15.16dBi
Specification
This antenna is made with 7/8 inch (22.23mm) tube tapering to 3/4 inch (19.05mm) tube followed by 5/8 inch (15.88mm) and 1/2 inch (12.7mm) outer elements with the OP-DES end sections 3/8 inch (9.525mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 1.5 inch square 16SWG aluminum.
OTHER TAPER SCHEDULES ARE AVAILABLE IN THIS ANTENNA, CALL OR EMAIL FOR DETAILS
Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts (VHF).
Note: much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up or our antennas have least effect on performance and pattern degradation. More information can be found here
•Marine grade Stainless Steel Fittings*
•Original Stauff Insulation clamps
•Mill finished boom and elements for highest levels of accuracy