Můžete se přihlásit anebo si založit konto
CZK Košík

ELECRAFT KX2 - mini KV transceiver

Top produkty
ELECRAFT KX2 -  mini KV transceiver
Kompaktní TCVR

Cena s DPH 26 890,00 CZK

Cena bez DPH22 223,14 CZK

ks
Odkazy
Nejmenší plnohodnotný KV TCVR na světě

ultrakompaktní KV transceiver
Pásma 80-10 m, výkon 0,1-10 W,

Rozměry 7,1x14,7x3,8 cm, hmotnost pouze 0,3 kg

Ceny a dodací lhůty doplňků (option) na dotaz

-----
KX2 “stealth” transceiver can go wherever your imagination takes you.
Thanks to state-of-the-art construction techniques, it’s only 5.8 x 2.8 x 1.5” and weighs just 13 ounces—making it the smallest full-featured HF radio on the planet.

KX2 Quick Specs
• Only 13 oz. (0.3 kg) – ideal for portable and hand-held operation
• Internal 2.6 Ah, 11 V Li-ion battery option
• Internal wide-range ATU option
• Current drain as low as 135 mA
• Built-in microphone and speaker
• Advanced DSP provides dual watch, noise reduction, noise
blanking, autonotch, stereo audio
• Versatile software-defined radio (SDR) architecture
• Operates in data modes (PSK31/RTTY) with or without a PC
• New KXPD2 compact keyer paddle

STANDARD FEATURES

80-10 meter ham bands; general coverage receive from 3-32.0MHz (also covers 0.5 to 3 MHz with reduced sensitivity)

All modes: SSB, CW, and Data (four sub-modes)

Ultra-compact size: 2.8”H x 5.8”W x 1.5”D; 13 oz (less options); low-profile knobs and feet for minimum height

Rear tilt foot provides 3-point mount for rugged terrain

Custom high-contrast LCD with alphanumeric text display

Current drain as low as 135 mA in receive mode

High-performance 32-bit floating-point DSP

Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle

Synthesizer has 1-Hz tuning resolution

Integrated numeric keypad for direct frequency entry
RECEIVER

Software-defined-radio (SDR) architecture for versatility

Switchable preamp and attenuator

8-band RX EQ

Simultaneous dual receive over up to +/- 23 kHz for split-DX operation

Built-in speaker; stereo jack for headphones or powered speakers

Easy-to-use Passband Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings

Auto-notch removes interfering carriers; adjustable noise reduction and noise blanking; stereo audio effect

Center-tuning indicator for CW and data modes; auto-spot

TRANSMITTER

Up to 10 W on 80-15 m, 8 W on 12 and 10 m (typ.)

100 W with KXPA100 amplifier

Rugged, SWR- and temperature-protected final amplifier stage

Use with built-in mic or MH3 (with UP/DN VFO functions)

Optional KXPD2 keyer paddle with adjustable contact spacing; easily removable for transport; built-in allen wrench storage

CW keyer with 8-50 WPM range; fast, full-break-in keying

Built-in digital voice recorder (DVR) with 2 message memories

Three CW/DATA message memories

Fast, silent, PIN-diode T-R switching – no noisy relays

DSP speech processing for excellent “punch”

8-band TX EQ tailors passband to your voice and microphone


OTHER FEATURES

General-purpose and per-band memories store VFOs, modes, etc.

Computer control via supplied USB or RS232 cable

Free firmware updates via provided application software

Programmable switch (PFn) for access to an often-used menu entry

Full remote-control command set works with popular computer software applications

Selectable switch-press tones or full Morse code-based interface

Tutorial-style manual ideal for new hams



OPTIONS AND ACCESSORIES
KXAT2 Internal, Wide-Range Automatic Antenna Tuner
KXBT2 Lithium-ion Battery Pack; 11 V, 2.6 Ah. Can be plugged in internally or externally.
KXBC2 External Lithium-ion Fast-Charger for KXBT2 Battery Pack
KXPD2 Attached Precision Keyer Paddle
CS40 & CS60 Compact Padded Carrying Cases. The CS40 is sized for the KX2, a wire antenna, earbuds, keyer paddle, log, and small accessories.
The larger CS60 will accommodate an MH3 mic and more accessories.
MH3 Hand Microphone with UP/DN Controls
KXIO2 Real-Time Clock + General-Purpose Outputs. Clock time-keeping accuracy can be fine-tuned. AUX 1 & 2 outputs are open-drain; for per-band control
of relays to switch antenna coil taps, transverters, etc.
KXPA100 High-Performance 160-6 meter, 100-W Ampflier. See below; also works with other 5 to 10 W transceivers.
KXAT100 Wide-Range 100-W ATU with Dual Antenna Jacks. Mounts inside KXPA100 amplifier.